Image 1 of 1
Check availability, pricing and lead times.
Specification
| Housing | |
| Setup | Portable processor-controlled hardness tester using Ultrasonic Contact Impedance (UCI) measurement technology |
| Dimensions | Approx. 160 × 70 × 45 mm (6.3 × 2.8 × 1.8 in) |
| Weight | Approx. 300 g (0.7 lb) including batteries |
| Measurement method | Vickers indentation evaluation using the UCI method with 136° diamond indenter |
| Probe compatibility | Supports UCI probes from HV0.1 to HV10 test loads |
| Switch-on | Press of a key |
| Switch-off | Automatic power-off function |
| Display and Keypad | |
| Display | 4 digit LCD display with switchable backlight |
| Measurement display | Single hardness value or average value of a measurement series |
| Power Supply | |
| Batteries | 2 × AA 1.5 V cells (AlMn / alkaline / rechargeable NiCd or NiMH) |
| Operating time | Approx. 15 hours without backlight |
| Battery indicator | Low battery indication |
| Environmental Conditions | |
| Operating temperature | -15 °C to +55 °C (5 °F to 131 °F) |
| Storage temperature | -20 °C to +60 °C (-4 °F to 140 °F) |
| Probe operating temperature | 0 °C to +40 °C |
| Evaluation | |
| Measurement range | 20 – 1740 HV (Vickers) |
| Hardness conversions | HV, HB, HRC, HRB and tensile strength conversions (material dependent) |
| Resolution | 1 HV, 1 HB, 1 N/mm², selectable HRB/HRC resolution |
| Statistics | Average value display |
| Measurement uncertainty | Maximum deviation approx. ±3.6% from reference value (dependent on test conditions) |
| Data memory | MIC 10 DL version available with internal data storage and RS-232 interface |
| Data logger memory | Up to approx. 1800 measurements internal memory (MIC 10 DL version) |
| Standards | UCI hardness testing method according to ASTM A1038 |
